Roller Coaster

Stormheart's Roller Coaster

Basically, The roller coaster consist of racks and rails, racks are standard furnitures, rails are similar to conveyor belts and I will explain the difference here.



Roller Coaster Rail Starter

The rail starter is very similar to a conveyor belt,
the only difference is that the furniture on it move continuously and faster.

Roller Coaster Rail

The rails also move furniture on it continuously and quickly.
The difference is that furniture placed on it will not start to move by itself.
This is because the direction where it will move furniture is dependent
on where the furniture come from.

1) Furniture placed directly on it will remain stationary and will not move.

2) Furniture translated on it will move according to the following rules:

a) If the furniture comes from a direction directly opposite to the direction faced by the rails, the furniture will be moved in the same direction.
eg: Rail is facing SE, furniture comes from SE, going to NW, rails will move furniture to NW

b) If the furniture comes from any other direction, it will be moved according to the direction that the rails is facing . eg:
Rails is facing SE, furniture comes from NW, going to SE, rails will move furniture to SE
Rails is facing SE, furniture comes from SW, going to NE, rails will move furniture to SE

Roller Coaster Slope

Slopes are similar to rails, with 2 difference.

1) Slopes are able to move furniture to a level higher or lower than themselves, depending on how high the slope is. x1 slope will move higher or lower by 1 and x2 will move by 2.

2) Furnitures placed on slopes by default will start moving downwards

Roller Coaster Corner

Corners are similar to rails. Furniture placed on it will not move.
Like rails, it will only move furniture that are already moving.
The only difference is that when a furniture is moved onto it,
it will be rotated clockwise or anti clockwise according to where furniture come from.
The direction where the furniture is moving will also be rotated clockwise or anti clockwise.
Due to technical limitations, they cannot have a corner that can be rotated in all 4 directions.
Thus 2 different corners are needed for top and bottom.
Also, please note that if a furniture is moved onto the corner from the rounded side,
the behavior of the corner is not guaranteed.
It is possible that they will change the behavior in the future.

Other Pictures will be Posted Soon

Review by: Cymric's Update